Quatech SSP-100 Single Port RS-232 Serial PCMCIA Card
Jump to navigation
Jump to search
Quatech SSP-100 Single Port RS-232 Serial PCMCIA Card | |
---|---|
![]() | |
Port: | PCMCIA |
Rating: | ![]() ![]() ![]() ![]() Good |
Driver: | PCMCIA.SYS, SSP100.SYS |
General Specs
- Model: SSP-100
- HardwareID:
- Port: PCMCIA
General Comments
This is a PCMCIA serial port adapter.
- Config.sys
REM *** QUATECH SSP-100 PCMCIA RS232 *** REM DEVICE=D:\OS2\BOOT\QCOM.SYS (1,2F8,3) /L REM DEVICE=D:\OS2\BOOT\QVCOM.SYS (1,2F8,3) DEVICE=D:\OS2\BOOT\SSP100.SYS COM1
- Report by ExPLIT [1]
Got my Quatech SSP-100 PCMCIA Card recognized with PCMCIA Socket Services 8.0.
PCMCIA Controller Driver, which I successfully used is Intel SS2PCIC.SYS, commercial Driver APSoft SSPCIC.SYS also recognizes my PCMCIA Controller Ricoh R5C476 II but I got it not working with it.
The magic trick was in this line:
BASEDEV=PCMCIA.SYS /V /R:500
While the ArcaOS Socket Services 5.0 need the /R:500 to operate in the 5.0 Version of socket services (Default one is 2.0) in the newer IBM Socket Services 8.0 this switch should be removed.
After I removed /R:500 switch, I got the message, that the Card Services Version are 8.0 and suddenly the SSP-100 was recognized as a Modem (COM1), got Power and seems to work.